Do I Qualify
- Receive electric service from Edmond Electric.
- Complete an in-person home energy audit before making changes.
- Use a licensed contractor except for eligible precharged homeowner-installed mini-splits.
- Complete permits and the equipment inspection after installation.
- A replacement that increases electrical demand does not qualify.
- A previously rebated location generally must wait ten years.
How Much Comes Off
| Equipment | Requirement | Amount |
|---|---|---|
| Air-source heat pump | SEER 17 or SEER2 16.20; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $175 per cooling ton |
| Air-source heat pump | SEER 18 or SEER2 17.05; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $200 per cooling ton |
| Air-source heat pump | SEER 19–20.99 or SEER2 18.10–19.99; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $275 per cooling ton |
| Air-source heat pump | SEER 21 or SEER2 20; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $300 per cooling ton |
| Dual-fuel heat pump | SEER 17 or SEER2 16.20; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $125 per cooling ton |
| Dual-fuel heat pump | SEER 18 or SEER2 17.05; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $150 per cooling ton |
| Dual-fuel heat pump | SEER 19–20.99 or SEER2 18.10–19.99; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $225 per cooling ton |
| Dual-fuel heat pump | SEER 21 or SEER2 20; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $250 per cooling ton |
| Mini-split heat pump | Ducted or non-ducted; SEER 18 or SEER2 17.05; EER 12.0 or EER2 11.49; HSPF 10 or HSPF2 8.9. | $150 per cooling ton |
| Electric geothermal heat pump | EER 17.1 or EER2 16.36; conversion from another HVAC type; operating integrated water heater or desuperheater. | $800 per cooling ton per AHRI |
| Dual-fuel geothermal heat pump | EER 17.1 or EER2 16.36; qualifying geothermal system with non-electric backup. | $250 per cooling ton per AHRI |
| Replacement geothermal heat pump | EER 17.1 or EER2 16.36; replaces an existing geothermal heat pump. | $250 per cooling ton per AHRI |
Who Files It
The homeowner submits the signed request with the invoice, AHRI information and required inspection documents. The rebate is payable to the building owner.
The money is paid to the homeowner.
The Steps to Apply
- Arrange the required energy audit before installation. Schedule an audit.
- Have the contractor confirm the efficiency bracket and any dual-fuel controls.
- Submit the completed forms and documents within 90 days after installation. Rebate request form.
Read on October 22, 2026 from the Edmond Electric page. The chart was printed Rev: 02/2026. A change to this program is a dated line in the changelog.