Cities / New Jersey / Rebates
PSE&G HVAC Instant Rebates Program: Open
Enrollment for 2026 is open. Open. Select a participating contractor. Your contractor will install eligible equipment and note your instant rebate on your invoice.
Serves: PSE&G electric or gas service areas in Bergen, Burlington, Camden, Essex, Gloucester, Hudson, Hunterdon, Mercer, Middlesex, Monmouth, Morris, Ocean, Passaic, Somerset and Union counties.
Do I Qualify
- Receive the applicable electric or gas service from PSE&G.
- Use a participating contractor in an existing home.
- New construction and condensing-to-condensing furnace replacements do not qualify.
How Much Comes Off
| Equipment | Requirement | Amount |
|---|---|---|
| Central AC, split, Tier 1 | SEER2 ≥ 15.2, EER2 ≥ 12 | $60 per system |
| Central AC, split, Tier 2 | SEER2 ≥ 17, EER2 ≥ 12 | $120 per system |
| Central AC, single package, Tier 1 | SEER2 ≥ 15.2, EER2 ≥ 12 | $60 per system |
| Central AC, single package, Tier 2 | SEER2 ≥ 17, EER2 ≥ 12 | $120 per system |
| Air-source heat pump, split, Tier 1 | SEER2 ≥ 15.2, EER2 ≥ 11.7, HSPF2 ≥ 7.8 | $300 per system |
| Air-source heat pump, split, Tier 2 | SEER2 ≥ 17.1, EER2 ≥ 11.7, HSPF2 ≥ 7.8 | $450 per system |
| Air-source heat pump, single package, Tier 1 | SEER2 ≥ 15.2, EER2 ≥ 10.6, HSPF2 ≥ 7.2 | $300 per system |
| Air-source heat pump, single package, Tier 2 | SEER2 ≥ 17.1, EER2 ≥ 10.6, HSPF2 ≥ 7.2 | $450 per system |
| Cold-climate air-source heat pump | SEER2 ≥ 15.2, EER2 ≥ 10, HSPF2 ≥ 8.1, COP ≥ 1.75 at 5°F; must replace a regular ASHP | $600 per system |
| Gas furnace | AFUE ≥ 95%; must replace a non-condensing unit | $540 per furnace |
| Smart thermostat with HVAC installation | New installation or replacement of a manual or conventional programmable thermostat, as part of an HVAC install | $60 per thermostat |
| Income-qualified equipment bonus | Eligible HVAC measure; LMI verification required; thermostats excluded | $300 per measure |
Valid from January 1, 2025 to June 30, 2027.
Who Files It
The participating contractor files the claim and credits the rebate on the homeowner's invoice.
The money is paid to the contractor.
The Steps to Apply
- Choose a participating contractor and confirm the matched equipment qualifies. Program and contractor information.
- Check the rebate on your invoice and sign the customer acknowledgment after installation.
Read on October 22, 2026 from the PSE&G page. A change to this program is a dated line in the changelog.